Specifications:

• Diameter range 48-108mm
• Height range 62-190mm
• Speed max 300 cpm depending the can size
• Tooling Ø48mm approximately, aerosol cones

Specifications:

• Diameter range 52-105mm
• Height range 62-190mm
• Speed max 300 cpm depending the can size
• Tooling Ø50mm aerosol bottoms approximately

Specifications:

• Diameter range: 50-108mm
• Heigh range: 38-240mm
• Max speed: 500cpm maximum depending the can size
• Tooling: aerosol top Ø52,5mm approximately
• With IMETA aerosol top feeder

Specifications:

• Diameter range: 50-108mm
• Heigh range: 38-240mm
• Max speed: 500cpm maximum depending the can size
• Tooling : aerosol bottom Ø55mm approximately

Specifications:

• Diameter range 52-99mm
• Heigh range 45-180mm
• Speed 750cpm maximum depending the can size
• Tooling Ø83mm approximately
• 48 heads

Specifications:

• Force 40Tn
• Cursa 45mm
• Speed 300 gpm maximum depending the lid size
• Pneumatic cluth
• Tooling Ø73mm shell double die approximately
• With Bliss double curler

Specifications:

• Force 50Tn
• Length 180mm
• Cleavage 350mm
• With reduction
• Distance between charrion and table 460mm
• With pneumatic cushion
• With pneumatic clutch

Specifications:

• Force 50Tn
• Cursa 120mm
• Adjustable cursa
• Cleavage 350mm
• With pneumatic clutch

Specifications:

• Force 70Tn
• Length 180mm
• Cleavage 400mm
• With reduction
• With pneumatic cushion
• With pneumatic clutch

Specifications:

• Sheet width range 510-1160mm
• Sheet length range 550-1200mm
• - 1st operation 2 pairs of blades
• - 2nd operation 3 pairs of blades
• Shaft diameters 110mm
• Speed 40 blades/min max. depending on sheet size
• With blade grinder

Specifications:

• Diameter range 50-110mm
• Height range 50-150mm
• Max speed 400cpm maximum depending the can size
• Tooling Ø60mm approximately

Specifications:

• Diameter range 52-80mm
• Heigh range 80-270mm
• Speed 300cpm maximum depending the can size
• Tooling Ø52mm aerosol approximately

Specifications:

• Diameter range 52-80mm
• Heigh range 80-270mm
• Speed 300cpm maximum depending the can size
• Tooling Ø54mm aerosol bottoms approximately

Specifications:

• Spin flanger
• Diameter range 52-105mm
• Heigh range 40-315mm
• Speed 1200cpm maximum depending de can size
• Tooling Ø99mm approximately
• 12 heads

Specifications:

• Simple curler
• Diameter range 42-155mm
• Speed 270tmp maximum depending the lid size
• Tooling dia.52mm approximately

Specifications:

• Diameter range Ø 42-155mm
• Speed 270tpm maximun depending the lid size
• Tooling Ø153mm approximately
• With input conveyor

Specifications:

• Injection Liner
• Diameter range Ø83-189mm
• Speed 95-270epm maximum depending the can size
• Tooling Ø165mm approximately

Specifications:

• Diameter range 99-155mm
• Heigh range 100-200mm
• Speed 320cpm maximum depending the can size
• Tooling Ø153mm approximately
• 10 heads
• Vertical beader

Specifications:

• Ends automatic feeder
• Tooling Ø56,5mm approximately

Specifications:

• Automatic ends feeder
• Tooling Ø73mm approximately

Specifications:

• Double cylindric curler
• Diameter between sectors: 550mm
• Tooling: Ø52mm approximately
• Speed: 600 tpm maximum depending the lid size

Specifications:

• Diameter range 100-165mm
• Heighr range 100-245mm
• Speed 300cpm
• Tooling Ø153mm

Specifications:

• Force: 30Tn
• Speed: 200 strokes/min
• Cursa: 85mm
• Tooling Ø165mm
• Centralized lubrication
• Pneumatic clutch

Specifications:

• Diameter range 50-165mm
• Heigh range 75-285mm
• Max speed before parting 350cpm depending the can size
• Tooling Ø85 x 42mm x 2 approximately
• 8 heads

Specifications:

• Diameter range 50-165mm
• Heigh range 75-285mm
• Max speed before parting 350cpm depending the lid size
• Tooling Ø153 x 78mm x 2 approximately
• 8 heads

Specifications:

• Diameter range 50-165mm
• Heigh range 40-310mm
• Speed 450cpm
• Tooling Ø153mm
• 6 heads

Specifications:

• Diameter range 65-120mm
• Height range 60-170mm
• Speed 300cpm maximum depending the can size
• Tooling Ø99mm approximately

Specifications:

• Diameter range 65-165mm
• Height range 60-285mm
• Speed 250cpm maximum depending the can size
• Tooling Ø153mm aproximately

Specifications:

• Diameter range 50-130mm
• Height range 40-310mm
• Speed 1000 cpm
• Tooling Ø65mm
• 12 heads

Specifications:

• Diameter range 50-100mm
• Speed 700tpm maximum depending the can size
• Tooling Ø99mm approximately

Specifications:

• Diameter range 50-110mm
• Height range 40-270mm
• Max speed 600cpm maximum depending the can size
• Tooling Ø71,5mm approximately

Specifications:

• Vertical beader
• Diameter range: 52-99mm
• Height range: 76-125mm
• Speed: 750cpm maximum depending the can size
• Tooling: Ø65mm approximately
• 9 heads

Specifications:

• Diameter range: 45-99mm
• Height range: 45-215mm
• Spped: 700cpm maximum depending the can size
• Without tooling

Specifications:

• Double injection liner
• Diameter range 50-105mm
• Speed 600 epm maximum depending the lid size
• Tooling Ø99mm approximately

Specifications:

• Injector double liner
• Diameter range 50-99mm
• Max speed 800 epm depending the lid size
• Tooling Ø99mm approximately
• With electronic guns

Specifications:

• Double injector liner
• Diameter range 52-84mm
• Speed 800cpm maximum depending the lid size
• Tooling Ø73mm approximately

Specifications:

• Max width cut 1000mm
• Speed 80 gpm

Specifications:

• Necker, flanger and seamer one side
• Diameter range Ø50-125mm
• Height range 70-350mm
• Spped 100cpm maximum depending the can size
• Tooling Ø105mm approximately

Specifications:

• Flanger-seamer
• Diameter range 50-195mm
• Height range 75-400mm
• Max speed 100epm depending the can size
• Tooling Ø127mm approximately

Specifications:

• Flanger-seamer
• Diameter range 50-195mm
• Height range 75-400mm
• Max speed 100epm depending the can size

Specifications:

• Necking-Flanger-Seamer
• Diameter range 52-105mm
• Heigh range 40-160mm
• Max speed: 400cpm depending the can size
• Tooling Ø52/50 x 136mm approximately
• 1ª Op: Necking
• 2ª Op: Spin flanger
• 3ª Op: 1ª close operation
• 4ª Op: 2ª close operation

Specifications:

• Diameter range 52-105mm
• Heigh range for spin flanger 40-160mm
• Heigh range for beader 40-125mm
• Speed 800cpm depending the can size
• Tooling Ø73/70 x 110mm approximately
• 1ª Op: Spin Flanger 8 heads
• 2ª Op: Beader 8 heads

Specifications:

• Diameter range 52-105mm
• Heigh range 50-190mm
• Speed 600 c/min depending de can size
• Tooling Ø72,8 x 62mm approximately
• 8 heads
• 1st Operation Necking
• 2nd Operation Spin Flanger
• 3rd Operation Beader

Specifications:

• Diameter range 52-105mm
• Height range 45-190mm
• Speed max 600/1200cpm depending the can size
• Tooling Ø73 x 2 x 62,1mm approximately
• 8 heads

Specifications:

• Flanger and necking
• Diameter range 45-100mm
• Heigh range 70-310mm
• Max. speed 400 cpm depending the can size
• Tooling: Ø57mm aerosol with necking, top Ø52mm y bottom Ø54mm approximately
• With NEW electrical control pannel

Specifications:

• Diameter range 45-100mm
• Heigh range 70-310mm
• Speed max 400 cpm depending the can size
• Tooling: Ø52mm approximately aerosol

Specifications:

• Double flanger-necker-seamer
• Diameter range: 45-117mm
• Heigh range: 55-400mm
• Speed: 60cpm depending the can size

Specifications:

• Max sheet width 1150mm
• 3 pairs of widia blades
• With Cevolani MZ67 sheet feeder
• With sheet stacker

Specifications:

• Diameter range 45-105mm
• Heigh range 20-120mm
• Speed 80cpm

Specifications:

• Manual water tester
• 6 stations
• Tooling Ø73mm approximately

Specifications:

• Diameter range 99-240mm
• Heigh range 80-350mm
• Max speed 80 epm depending the can size
• Max weld speed 12m/min
• Overlap 0,5mm
• Tooling Ø165mm approximately

Specifications:

• Diameter range Ø50-110mm
• Heigh rangre 25-200mm
• Max. speed 300cpm depending the can size
• Tooling Ø56,5mm approximately
• 5 heads

Specifications:

• Diameter range Ø50-110mm
• Height range 25-200mm
• Max speed 300cpm maximum depending the can size
• Tooling Ø65mm approximately

Specifications:

• Diameter range: Ø52-105mm
• Heigh range: 96-228mm
• Speed 50m/min 300cpm maximun depending the can size
• Tooling Ø52mm approximately

Specifications:

• Diameter range: 45-165mm
• Height range: 55-320mm
• Spped: 62m/min 400cpm maximum depending the can size
• Tooling: Ø65mm unitool approximately
• With Unisoud static converter
• With Discon

Specifications:

• Diameter range 52-105mm
• Heigh range 90-140mm
• Speed 600cpm 70m/min maximun depending the can size
• Tooling Ø65mm approximately
• With Discon system

Specifications:

• Diameter range 99-330mm
• Height range 80-460mm
• Spped 21m/min 80cpm maximum depending the can size
• Tooling Ø127mm approximately
• With Soudronic static frequency converter

Specifications:

• Diameter range 99-330mm
• Height range 80-460mm
• Spped 21m/min 80cpm maximum depending the can size
• Tooling Ø189mm approximately
• With weld monitor
• With Discon

Specifications:

• Diameter range 99-330mm
• Height range 80-460mm
• Arm diameter Ø85mm
• Spped 21m/min 80cpm maximum depending the can size
• Tooling: No

Specifications:

• Diameter range 99-330mm
• Heigh range 80-460mm
• Arm diameter Ø85mm
• Speed 21m/min 80cpm maximun depending the can size
• Tooling Ø285mm approximately